Industrial Material And Air Handling Equipment
Industrial Cyclones Type A - B
- Welded, bolted and flanged 12-gauge or heavier mild steel in inlet diameters 12" to 48"
- Design and construction minimize abrasion as system particulate is collected and separated
- Used as a pre-cleaner, the A-B cyclone separator reduces the load for the final filter
- Maximum efficiency is obtained when paired with final filter or in closed loop systems as atmospheric emissions are eliminated
- Bolted construction enables inlet position to be interchanged from clockwise to counterclockwise rotation
- Hot rolled plate construction is cleaned, primed and painted with selection of standard paint colors
- Flat top reinforced by gussets with lifting eyes
- Length and degree of cone
- Pressure relief vents
- Steel supports, service platforms and ladders
- Air outlet cap
- Size and materials including Galvanized, Abrasion Resistant Steel, Stainless, Hot Rolled Plate
- Inlet transitions
- Multiple inlets with automatic back draft dampers
- Round or rectangular inlets
- Cone hopper to match airlock or other equipment
- Cone access doors
- Bolt-in wear plates
- Body diameters 104" and smaller are shipped in one piece
- Body diameters above 104" are shipped knocked down with flanged bodies and cones
- Average shipment 2 to 4 weeks from order, subject to work schedules and material availability
An Industrial Cyclones Type A-B brochure with dimensions is downloadable.